Using dd to backup

sudo fdisk -l sudo dd bs=4M if=/dev/sdb | gzip > /home/your_username/image`date +%d%m%y`.gz TO RESTORE sudo gzip -dc /home/your_username/image.gz | dd bs=4M of=/dev/sdb

Fonera DD-WRT flashing

LAN ip 192.168.1.250

in DOS ping -t 192.168.1.254

PLUG in FONERA

TELNET in to RedBoot at 192.168.1.254 -p 9000

AND you've got the

That's it. You are ready now to flash FONERA with a new firmware.

1 . Copy root.fs and vmlinux.bin.l7 to your tftp server directory

2. Configure the RedBoot bootloader IP and TFTP server settings using

ip_address -l [local ip address] -h [remote server address]

ip_address -l 192.168.1.254 -h 192.168.1.250

3.

flash the unit by entering the following commands

RedBoot> fis init

About to initialize [format] FLASH image system - continue (y/n)? y

*** Initialize FLASH Image System

... Erase from 0xa83e0000-0xa83f0000: .

... Program from 0x80ff0000-0x81000000 at 0xa83e0000: .

RedBoot> load -r -b 0x80041000 linux.bin

Using default protocol (TFTP)

Raw file loaded 0x80041000-0x806d1fff, assumed entry at 0x80041000

RedBoot>  fis create linux

... Erase from 0xa8030000-0xa86c1000: ..........................................................................................................

... Program from 0x80041000-0x806d2000 at 0xa8030000: ..........................................................................................................

... Erase from 0xa87e0000-0xa87f0000: .

... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .

RedBoot> fconfig

Run script at boot: true

Boot script:

.. fis load -l vmlinux.bin.l7

.. exec

Enter script, terminate with empty line

>> fis load -l linux

>> exec

>> 

Boot script timeout (1000ms resolution): 10

Use BOOTP for network configuration: false

Gateway IP address:

Local IP address: 192.168.1.254

Local IP address mask: 255.255.255.0

Default server IP address:

Console baud rate: 9600

GDB connection port: 9000

Force console for special debug messages: false

Network debug at boot time: false

Update RedBoot non-volatile configuration - continue (y/n)? y

... Erase from 0xa87e0000-0xa87f0000: .

... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .

RedBoot>reset

FOR OPENWRT

RedBoot> ip_address -l 192.168.1.254 -h 192.168.1.250

RedBoot> load -r -b %{FREEMEMLO} openwrt-atheros-vmlinux.lzma

RedBoot> fis init

RedBoot> fis create -e 0x80041000 -r 0x80041000 vmlinux.bin.l7

RedBoot> load -r -b %{FREEMEMLO} openwrt-atheros-root.squashfs

RedBoot> fis create rootfs

RedBoot> fconfig boot_script_data 
boot_script_data: 
.. fis load -l vmlinux.bin.1
.. exec
Enter script, terminate with empty line
>> fis load -l vmlinux.bin.l7
>> exec
>> 
Update RedBoot non-volatile configuration - continue (y/n)? y
... Erase from 0xa87e0000-0xa87f0000: .
... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .

 RedBoot> reset 

  

Re: Overclocking Atheros devices such as La Fonera Fon/Dir-300

by ngg.online » Tue Mar 30, 2010 10:35 pm

Ok so after reading some more in the DD-WRT forum I found a solution myself. It is almost identical as in the one in the DD-WRT forum, however some commands are a bit different for Gargoyle and the offsets are different for D-Link Dir-300. 

So here is my solution, it is successfully tested on FON2100 and DIR-300:

Log on the the device using SSH, then:

CODE: SELECT ALL

cat /dev/mtdblock0 > /tmp/RedBoot.bin

Now copy the file with scp to your local computer and load it into a hex editor.


* For La Fonera FON2100 (and FON2200 did not test it personaly):
- change offset 0x1e3 from 0x03 to 0x01 (divisor 2 instead of 5)
- change offset 0x1ef from 0x5c to 0x28 (multiplicator 10 instead of 9 = 200 mhz) 

MD5 checksums: 
FON2100 183MHz: D8F123639752F2E56B46606461AD8174
FON2100 200MHz: 6AD647AE0978FFBA4357EFBCF0B4DF98

FON2200 183MHz: 80B1A6D05AE6B420129326F8B77B2FC6
FON2200 200MHz: B12C88742121D42C848C03AC36821F02 

* For D-Link Dir-300:
- change offset 0x17 from 0x03 to 0x01
- change offset 0x23 from 0x5c to 0x28 

MD5 checksums: 
DIR-300 183MHz: B9D638E537D01D3ED651FAB2AF63FC22
DIR-300 200MHz: 713806dbb99cb0e633a385eb1a8b5440

Alternatively, you can also download and use the already modified RedBoot bootloaders attached to this post. They worked for me, but I do not guarantee that they will work for you too.

OK now we just need to flash it back. 
Copy the modified RedBoot.bin back to the /tmp folder of your router and do:

CODE: SELECT ALL

mtd -f write /tmp/RedBoot.bin RedBoot

Then just reboot or replug the power and it will boot up with 200 MHz.

After rebooting you can verify the CPU speed by using SSH and typing the following:

CODE: SELECT ALL

cat /proc/cpuinfo

Hopefully this is useful to someone else as well.

ATTACHMENTS

 RedBoot-200Mhz.zip

RedBoot bootloader for overclocking FON2100 and DIR-300 @ 200 MHz.

(147.04 KiB) Downloaded 233 times

La Fonera Fon 2100 @ 200MHz + Gargoyle 1.2.5
D-Link Dir-300 @ 200MHz + Gargoyle 1.2.3
Buffalo WHR-HP-G54 + Tomato 1.28

ngg.online

Posts: 15

Joined: Sun Nov 08, 2009 6:51 am

Raspberry Pi

First to do after Reinstall

DHCP_Server

най-доброто

Share WiFi With Ethernet Port on a Raspberry Pi

https://github.com/arpitjindal97/raspbian-recipes

To use a X screen on the VNC
http://raspberrypi.stackexchange.com/questions/9590/tightvncserver-show-the-same-screen-on-hdmi-and-vncclient

Connect to unsecured wireless network

Generalplus MD80 Mini Spy Cam (type 808)

will work on Raspberry Pi and Cubbieboard 2 ( not tested)

Prep & Optional Tools:  
sudo apt-get update
sudo apt-get install guvcview
sudo apt-get install uvcdynctrl
sudo apt-get install uvccapture
sudo apt-get install qv4l2
sudo apt-get install mplayer
sudo apt-get install v4l-utils
sudo reboot
Clear out dmesg:
sudo dmesg --clear
Unload driver and reload to fix quirks:
sudo modprobe uvcvideo -r
sudo modprobe uvcvideo quirks=2
Plug in cam & check device is recognise (works best with SD card inserted):
lsusb
Bus 002 Device 016: ID 1b3f:0c52 Generalplus Technology Inc. 808 Camera #9 (mass storage mode)
Press the "power" button on the side of the cam
lsusb
Bus 002 Device 017: ID 1b3f:2002 Generalplus Technology Inc. 808 Camera #9 (web-cam mode)
Confirm video0:
ls /dev/video0
Check dmesg for errors:
dmesg
Run mplayer
mplayer tv:// -tv driver=v4l2:device=/dev/video0

streamer -c /dev/video0 -b 16 -t 5 -r 2 -s 640x480 -o /root/eyetoy00.jpeg

 

 

VPS -ses

Mine are - Chunkhost.com , https://galaxyhostplus.com/ , http://www.pieserv.com/

I've found them here http://lowendbox.com

New one - the best.
IntenseVPS
n3servers.com

FOREX

Register for an OANDA forex trading accountForex Market Hours powered by OANDA

Telstra-Huawei-E5372t-Wifi-4G-wireless-Modem-UNLOCKED

I've purchased it here http://www.ebay.com.au/itm/Telstra-Huawei-E5372t-Wifi-4G-wireless-Modem-UNLOCKED-/272044636569?ssPageName=ADME:X:AAQ:AU:1123
WOW!!  almost 70 AUD. Not cheap at all.



Here I've found a lot of info
http://forums.whirlpool.net.au/forum-replies.cfm?t=2175675&p=12

http://4pda.ru/forum/index.php?showtopic=531966&st=200


The name of the file for last update that I've found is

Update_WEBUI_13.100.08.00.997_E5_V7R1_V3R2.exe

Now the goal here is to update to the best firmware.

UNDER LINUX
http://www.linux.org.ru/forum/admin/11107841

ipv6 for Cubieboard

My domains at dot.tk login with facebook

Here is information about ipv6
https://version6.ru/vps 

Here is how to test http://test-ipv6.com/

Brilliant. IPV6 visible from everyware.
Today I've found
https://forums.he.net/index.php?topic=2933.msg17340#msg17340

all this is linked with my tzar.ml domain and  DDNS https://dns.he.net/
 absolutly free. - GREAT.
My home camera will be visible from  ALL ARROND THE GLOBE now.

ANOTHER DDNS privider https://www.dnspod.com/



Implement it with my miredo. All OK.

I've found that is possible to do with CURL https://forums.he.net/index.php?topic=2323.msg13444#msg13444
HA.